Silicone One-part Moisture Cure RTV Adhesive & Sealants

Product description

DOW Silicones (formerly Dow Corning) delivers a wide variety of silicone-based polymers for diverse solutions in electric, electronic and energy applications. DOWSIL™ silicone adhesives are used primarily to attach components, such as module lids and baseplates, within electronic modules or seal openings in the module to exclude dirt, water or other contaminants. A key benefit of silicone adhesives is their potential to significantly increase the reliability of an electronic module or component because of their stress-relieving properties. The adhesives in our portfolio have a “rubbery”, elastomeric nature and are not conventional, highly rigid adhesives. This low-stress environment can reduce damage to module components and interconnections. They are also able to maintain their stress-relieving nature throughout exposure to extreme environmental conditions such as high temperature and humidity. DOWSIL™ silicone adhesives also offer versatile processing. Some are cured at room temperature, while others can be accelerated by heat. This can allow faster process times or the use of lower temperature capable materials, depending on the needs of your application and process. More recently developed products are resulting in even faster and lower temperature curing capability. The line of adhesives available is also offered in a range of flow properties to fill gaps and channels, or to remain in place as the application requires. Many of the flowable products will self-level to fill channels and cavities.

These one-part adhesives utilise moisture from the atmosphere for curing. They are supplied ready-to-use and require no mixing equipment or ovens. The assembled parts can simply be set aside at normal room environments. Parts can be handled in 10-120 minutes and achieve full properties in 24-72 hours, depending on the product utilised and its bond line thickness. Some of our newer products are formulated for faster room temperature cures. Because these products require moisture from the outside, they are not suitable for highly confined or deep-section curing. Some acceleration of curing can be accomplished with mild heating at temperatures not exceeding 60 °C.  

Product Hardness [ShA] Viscosity [mPas] Tensile Strength [MPa] Tack Free Time (Cure time) 
DOWSIL™ 3145 RTV Mil-A-46146 Adhesive 50  Non-flowing 7 70 min (3-7 days @25 °C) 
DOWSIL™ 3165 Fast Tack RTV Adhesive Sealant 35  Non-flowing 1 5 min (3-7 days @25 °C) 
DOWSIL™ 6-1104 CV Sealant 45  Non-flowing 6.7 65 min (3-7 days @25 °C) 
DOWSIL™ 730 FS Solvent Resistant Sealant 40  3.3 Non-flowing 10 min (3-7 days @25 °C) 
DOWSIL™ 732 Multi-Purpose Sealant 30  Non-flowing 2.0 15 min (3-7 days @25 °C) 
DOWSIL™ 738 Electrical Sealant 35  Non-flowing 2.7 90 min (3-7 days @25 °C) 
DOWSIL™ 739 Plastic Adhesive 25  Non-flowing 1.5 75 min (3-7 days @25 °C) 
DOWSIL™ 744 RTV Adhesive Sealant 35  Non-flowing 2.5 40 min (3-7 days @25 °C) 
DOWSIL™ 7091 Adhesive  30  Non-flowing 2.5 28 min (3-7 days @25 °C) 
DOWSIL™ 7092 Adhesive  50  Non-flowing 2.0 30 min (3-7 days @25 °C) 
DOWSIL™ 7093 Adhesive  30  Non-flowing 2.0 30 min (3-7 days @25 °C) 
DOWSIL™ 7094 Flowable Sealant 20  33,000 1.2 40 min (3-7 days @25 °C) 
DOWSIL™ SE 9100 Adhesive 25  45,000 2.5 10 min 
DOWSIL™ SE 9120 Adhesive 25  6,500 1.5 10 min (3-7 days @25 °C) 
DOWSIL™ SE 9120 S Adhesive 20  7,000 1.5 10 min (3-7 days @25 °C) 
DOWSIL™ SE 9152 HT Adhesive 25  10,000 3.0 20 min (3-7 days @25 °C) 
DOWSIL™ SE 9160 Adhesive 35  20,000 3.0 30 min (3-7 days @25 °C) 
DOWSIL™ SE 9168 RTV Adhesive 40  Non-flowing 3.5 5 min (3-7 days @25 °C) 
DOWSIL™ SE 9185 Adhesive 25  Non-flowing 3.0 10 min (3-7 days @25 °C) 
DOWSIL™ SE 9186 Sealant Adhesive 20  65,000 2.5 10 min (3-7 days @25 °C) 
DOWSIL™ SE 9188 RTV Adhesive 30  Non-flowing 3.0 10 min (3-7 days @25 °C) 
DOWSIL™ Q3-1566 Heat Resistant Adhesive 45  Non-flowing 3.5 5 min (3-7 days @25 °C) 
DOWSIL™ EA-2900 Sealant 50  Non-flowing 2.0 30 min (3-7 days @25 °C) 

Tradename(s)

DOWSIL™

Country availability

Austria Bosnia and Herzegovina
Bulgaria Croatia
Czech Republic Estonia
Germany Hungary
Latvia Lithuania
Macedonia Montenegro
Norway Poland
Romania Serbia
Slovakia Slovenia
Switzerland Turkey
Ukraine  
Eray Berberoğlu

Contact person

Eray Berberoğlu

Product Manager


email   phone

Further information

download

Electronics Portfolio
pdf (3.2 MB)


download

Silicone Sealants Foams Industrial Assembly
pdf (374.8 KB)